Cost to Tile Shower Pan Repair in Las Vegas, NV

$300–$2,500 in Las Vegas

Same as the national average · 1.00x cost multiplier

Expect to pay $300–$2,500 for a tile shower pan repair in Las Vegas, right at the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Las Vegas prices.

Cost Breakdown in Las Vegas

Line Item	Low	Mid	High
Cost per sq ft	$15	$30	$45
Materials	$75	$350	$1,200
Labor	$175	$750	$2,200
Permits	$0	$0	$150
Total	$250+0% vs. national avg	$1,100+0% vs. national avg	$3,550+0% vs. national avg

Budget

Grout repointing, caulk replacement at pan perimeter, and resealing. Addresses minor water intrusion at joints without replacing tile or liner.

Mid-Range

Replace cracked or stained tiles, repair or patch the waterproof liner, and re-grout affected area. Typical for a 16-25 sq ft shower pan with localized damage.

Premium

Full shower pan tear-out and replacement with custom tile on a mortar bed, new waterproof membrane, and matching field tile. Required when the liner has failed completely or subfloor damage is found.

Material Options

Material prices below are national averages; availability in Las Vegas may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Prefab Fiberglass or Acrylic Pan	$200-$600 per unit	Lowest material cost, no liner or mortar bed needed, installs quickly	Requires removing surrounding wall tile to swap in, limited size options, can flex and crack over time	Budget replacements in standard 32x32 or 36x36 alcove showersLowest material cost, no liner or mortar bed needed, installs quickly
PVC or CPE Tile-Over-Liner	$80-$200 per liner sheet	Flexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners	Must be installed over a properly sloped mortar bed, liner punctures are a common installer error	Custom tile shower floors in new or full-replacement workFlexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners
Hot-Mop Shower Pan	$250-$500 for the hot-mop service	Seamless waterproof layer, long track record in California and Southwest markets, sets in hours	Requires a specialist - not available in all markets, must cure before tiling	Full pan replacements in markets where hot-mop contractors are availableSeamless waterproof layer, long track record in California and Southwest markets, sets in hours
Sheet Membrane (Schluter Kerdi, Wedi)	$3-$8 per sq ft for membrane	Bonds directly to substrate, no mortar bed needed, faster install than liner systems	Higher material cost, requires compatible tile-setting materials, seams must be taped properly	Renovations where minimizing floor buildup height mattersBonds directly to substrate, no mortar bed needed, faster install than liner systems
Prefab Tile Kit (e.g., Schluter Shower System)	$500-$1,200 per kit	All components engineered to work together, eliminates liner failure risk, tile-ready surface included	Highest upfront material cost, requires installers familiar with the system	Full replacements where reliability and warranty matter more than upfront costAll components engineered to work together, eliminates liner failure risk, tile-ready surface included

Other Projects in Las Vegas

Central AC Installation

Paver Patio Installation

In-Ground Swimming Pool Installation

Back to national average for Tile Shower Pan Repair

Las Vegas Estimate

Typical Range

$300–$2,500

vs. National Average

Same as national

Cost Multiplier

1.00x

Cost Per sq ft

$15–$45

Estimates apply Las Vegas's 1.00x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →