Cost to Primary Bathroom Remodel in Sacramento, CA (2026)
If you’re budgeting a primary bathroom remodel in Sacramento, most projects run $12,816-$48,062, 7% above the $25,000 national average. What moves that number most is usually one thing: Room Size (typically 80-200 sq ft). On its own it can swing the cost by $8,000 - $30,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Limit plumbing moves - keeping all fixtures within 18 inches of existing drain and supply lines saves $2,000-$5,000
In the West Coast (where Sacramento sits): San Francisco and Seattle are at the high end; Portland runs 10-15% above average.
$12,816-$48,062 in Sacramento
7% above the national average · 1.07x cost multiplier
In Sacramento, a primary bathroom remodel runs $12,816 to $48,062 on average - about 7% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Sacramento
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $107 | $246 | $427 |
| Materials | $5,375 | $10,750 | $30,100 |
| Labor | $5,825 | $12,709 | $23,300 |
| Permits | $538 | $860 | $1,613 |
| Total | $11,738+7% vs. national avg | $25,394+7% vs. national avg | $59,313+7% vs. national avg |
Budget
Builder-grade updates to a larger primary bath: stock vanity, basic tile, updated fixtures, no layout changes.
Mid-Range
Semi-custom double vanity, porcelain tile, freestanding tub or large walk-in shower, mid-grade fixtures.
Premium
Custom cabinetry, natural stone, steam shower, soaking tub, radiant floor heat, designer lighting, full gut renovation.
Material Options
Material prices below are national averages; availability in Sacramento may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Large-Format Porcelain Tile (24x24 or larger) | $4-$12/sq ft materials | Modern and transitional primary baths, large floor areasSeamless look, fewer grout lines, easy to clean, durable |
| Marble Tile (Carrara, Calacatta) | $10-$40/sq ft materials | Premium remodels where resale value and aesthetics matter mostTimeless luxury appearance, each piece unique, adds home value |
| Freestanding Soaking Tub | $800-$6,000 fixture | Primary baths as a design focal pointStatement piece, versatile placement, multiple finish options |
| Frameless Glass Shower Enclosure | $1,200-$4,000 installed | Walk-in showers in mid-range to premium primary bathsOpen feel, easy to clean, modern aesthetic, shows off tile work |
| Quartz Vanity Countertop | $50-$100/sq ft installed | Double vanities where durability and low maintenance are prioritiesNon-porous, no sealing needed, consistent pattern, very durable |
Other Projects in Sacramento
Sacramento Estimate
Typical Range
$12,816-$48,062
vs. National Average
7% above national
Cost Multiplier
1.07x
Cost Per sq ft
$107-$427
This 1.07x estimate prices Sacramento labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →