Cost to Primary Bathroom Remodel in Oklahoma City, OK (2026)
If you’re budgeting a primary bathroom remodel in Oklahoma City, most projects run $10,810-$40,537, 10% below the $25,000 national average. What moves that number most is usually one thing: Room Size (typically 80-200 sq ft). On its own it can swing the cost by $8,000 - $30,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Limit plumbing moves - keeping all fixtures within 18 inches of existing drain and supply lines saves $2,000-$5,000
In the South Central (where Oklahoma City sits): Chicago is near the national average; most other Midwest cities run 10-20% below.
$10,810-$40,537 in Oklahoma City
10% below the national average · 0.90x cost multiplier
In Oklahoma City, a primary bathroom remodel runs $10,810 to $40,537 on average - about 10% below what homeowners pay nationwide. The South Central market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Oklahoma City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $90 | $207 | $360 |
| Materials | $4,700 | $9,400 | $26,320 |
| Labor | $4,677 | $10,205 | $18,710 |
| Permits | $470 | $752 | $1,410 |
| Total | $9,847-10% vs. national avg | $21,297-11% vs. national avg | $50,200-10% vs. national avg |
Budget
Builder-grade updates to a larger primary bath: stock vanity, basic tile, updated fixtures, no layout changes.
Mid-Range
Semi-custom double vanity, porcelain tile, freestanding tub or large walk-in shower, mid-grade fixtures.
Premium
Custom cabinetry, natural stone, steam shower, soaking tub, radiant floor heat, designer lighting, full gut renovation.
Material Options
Material prices below are national averages; availability in Oklahoma City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Large-Format Porcelain Tile (24x24 or larger) | $4-$12/sq ft materials | Modern and transitional primary baths, large floor areasSeamless look, fewer grout lines, easy to clean, durable |
| Marble Tile (Carrara, Calacatta) | $10-$40/sq ft materials | Premium remodels where resale value and aesthetics matter mostTimeless luxury appearance, each piece unique, adds home value |
| Freestanding Soaking Tub | $800-$6,000 fixture | Primary baths as a design focal pointStatement piece, versatile placement, multiple finish options |
| Frameless Glass Shower Enclosure | $1,200-$4,000 installed | Walk-in showers in mid-range to premium primary bathsOpen feel, easy to clean, modern aesthetic, shows off tile work |
| Quartz Vanity Countertop | $50-$100/sq ft installed | Double vanities where durability and low maintenance are prioritiesNon-porous, no sealing needed, consistent pattern, very durable |
Other Projects in Oklahoma City
Oklahoma City Estimate
Typical Range
$10,810-$40,537
vs. National Average
10% below national
Cost Multiplier
0.90x
Cost Per sq ft
$90-$360
This 0.90x estimate prices Oklahoma City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →