Cost to Primary Bathroom Remodel in Minneapolis, MN (2026)
If you’re budgeting a primary bathroom remodel in Minneapolis, most projects run $13,613-$51,050, 13% above the $25,000 national average. What moves that number most is usually one thing: Room Size (typically 80-200 sq ft). On its own it can swing the cost by $8,000 - $30,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Limit plumbing moves - keeping all fixtures within 18 inches of existing drain and supply lines saves $2,000-$5,000
In the Midwest (where Minneapolis sits): Chicago is near the national average; most other Midwest cities run 10-20% below.
$13,613-$51,050 in Minneapolis
13% above the national average · 1.13x cost multiplier
In Minneapolis, a primary bathroom remodel runs $13,613 to $51,050 on average - about 13% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Minneapolis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $113 | $261 | $454 |
| Materials | $5,125 | $10,250 | $28,700 |
| Labor | $7,014 | $15,303 | $28,055 |
| Permits | $513 | $820 | $1,537 |
| Total | $12,652+15% vs. national avg | $27,398+15% vs. national avg | $62,392+12% vs. national avg |
Budget
Builder-grade updates to a larger primary bath: stock vanity, basic tile, updated fixtures, no layout changes.
Mid-Range
Semi-custom double vanity, porcelain tile, freestanding tub or large walk-in shower, mid-grade fixtures.
Premium
Custom cabinetry, natural stone, steam shower, soaking tub, radiant floor heat, designer lighting, full gut renovation.
Material Options
Material prices below are national averages; availability in Minneapolis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Large-Format Porcelain Tile (24x24 or larger) | $4-$12/sq ft materials | Modern and transitional primary baths, large floor areasSeamless look, fewer grout lines, easy to clean, durable |
| Marble Tile (Carrara, Calacatta) | $10-$40/sq ft materials | Premium remodels where resale value and aesthetics matter mostTimeless luxury appearance, each piece unique, adds home value |
| Freestanding Soaking Tub | $800-$6,000 fixture | Primary baths as a design focal pointStatement piece, versatile placement, multiple finish options |
| Frameless Glass Shower Enclosure | $1,200-$4,000 installed | Walk-in showers in mid-range to premium primary bathsOpen feel, easy to clean, modern aesthetic, shows off tile work |
| Quartz Vanity Countertop | $50-$100/sq ft installed | Double vanities where durability and low maintenance are prioritiesNon-porous, no sealing needed, consistent pattern, very durable |
Other Projects in Minneapolis
Minneapolis Estimate
Typical Range
$13,613-$51,050
vs. National Average
13% above national
Cost Multiplier
1.13x
Cost Per sq ft
$113-$454
This 1.13x estimate prices Minneapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →