Cost to Bathtub Refinishing in San Francisco, CA

$512–$977 in San Francisco

55% above the national average · 1.55x cost multiplier

Expect to pay $512–$977 for a bathtub refinishing in San Francisco, about 55% above the national benchmark. The West Coast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Francisco prices.

Cost Breakdown in San Francisco

Line Item	Low	Mid	High
Cost per tub	$310	$744	$1860
Materials	$186	$124	$310
Labor	$279	$651	$1,240
Permits	$0	$0	$0
Total	$465+55% vs. national avg	$775+55% vs. national avg	$1,550+55% vs. national avg

Budget

DIY reglazing kit or basic pro spray, standard alcove tub, single coat.

Mid-Range

Professional reglazing with acid etch, new enamel coating, 1-year warranty.

Premium

Full reglazing with color change, surround tile refinishing included, 5-year warranty.

Material Options

Material prices below are national averages; availability in San Francisco may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard Epoxy Spray Kit (DIY)	$30-$80 kit	Inexpensive, available at any hardware store, no contractor needed	3-5 year lifespan, prone to peeling if surface not properly prepped, fumes require ventilation	Budget refresh, short-term rentals, pre-sale touch-upInexpensive, available at any hardware store, no contractor needed
Professional Epoxy/Polyurethane	$300-$600 installed	Hard durable finish, 10-15 year lifespan, professional prep ensures better adhesion	Requires 24-48 hours out of service, fumes during application	Most homeowners - the best balance of cost and longevityHard durable finish, 10-15 year lifespan, professional prep ensures better adhesion
Porcelain Repair Kit (Spot Repair)	$15-$40 kit	Fast, very cheap, good for isolated chips	Temporary fix only, color match is difficult, won't resurface the full tub	Small chip repairs while waiting for a full refinishing jobFast, very cheap, good for isolated chips
Acrylic Overlay	$500-$900 installed	Installs directly over existing tub, 15-20 year lifespan, durable and easy to clean	Adds slight height to tub rim, not available in all areas, more expensive	Tubs with extensive surface damage where reglazing alone won't holdInstalls directly over existing tub, 15-20 year lifespan, durable and easy to clean
Full Porcelain Reglazing	$600-$1,200 installed	Most durable refinishing option, closest to original factory finish, excellent for cast iron	Highest cost, requires experienced contractor, longer cure time	Cast iron or steel tubs worth preserving, high-end primary bathroomsMost durable refinishing option, closest to original factory finish, excellent for cast iron

Other Projects in San Francisco

Full Kitchen Remodel

Full Bathroom Remodel

Hardwood Floor Installation

Back to national average for Bathtub Refinishing

San Francisco Estimate

Typical Range

$512–$977

vs. National Average

55% above national

Cost Multiplier

1.55x

Cost Per tub

$310–$1860

Estimates apply San Francisco's 1.55x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →