Cost to Bathtub Refinishing in Salt Lake City, UT (2026)
If you’re budgeting a bathtub refinishing in Salt Lake City, most projects run $317-$606, 4% below the $480 national average. What moves that number most is usually one thing: Tub Size and Material. On its own it can swing the cost by $150 - $400, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Bundle surround tile refinishing with the tub job - contractors charge less per square foot when they're already set up on-site vs. a separate visit
In the Mountain West (where Salt Lake City sits): Denver and Salt Lake City near or above national average; rural areas lower.
$317-$606 in Salt Lake City
4% below the national average · 0.96x cost multiplier
Homeowners in Salt Lake City typically spend $317-$606 on a bathtub refinishing, about 4% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per tub | $192 | $462 | $1154 |
| Materials | $125 | $83 | $208 |
| Labor | $169 | $394 | $751 |
| Permits | $0 | $0 | $0 |
| Total | $294-2% vs. national avg | $477-5% vs. national avg | $959-4% vs. national avg |
Budget
DIY reglazing kit or basic pro spray, standard alcove tub, single coat.
Mid-Range
Professional reglazing with acid etch, new enamel coating, 1-year warranty.
Premium
Full reglazing with color change, surround tile refinishing included, 5-year warranty.
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard Epoxy Spray Kit (DIY) | $30-$80 kit | Budget refresh, short-term rentals, pre-sale touch-upInexpensive, available at any hardware store, no contractor needed |
| Professional Epoxy/Polyurethane | $300-$600 installed | Most homeowners - the best balance of cost and longevityHard durable finish, 10-15 year lifespan, professional prep ensures better adhesion |
| Porcelain Repair Kit (Spot Repair) | $15-$40 kit | Small chip repairs while waiting for a full refinishing jobFast, very cheap, good for isolated chips |
| Acrylic Overlay | $500-$900 installed | Tubs with extensive surface damage where reglazing alone won't holdInstalls directly over existing tub, 15-20 year lifespan, durable and easy to clean |
| Full Porcelain Reglazing | $600-$1,200 installed | Cast iron or steel tubs worth preserving, high-end primary bathroomsMost durable refinishing option, closest to original factory finish, excellent for cast iron |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$317-$606
vs. National Average
4% below national
Cost Multiplier
0.96x
Cost Per tub
$192-$1154
This 0.96x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →