Cost to Bathroom Ventilation Fan Installation in Jacksonville, FL

$137$683 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a bathroom ventilation fan installation runs $137 to $683 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line ItemLowMidHigh
Cost per unit$73$346$1365
Materials$55$137$364
Labor$109$228$546
Permits$0$0$0
Total$164-9% vs. national avg$364-9% vs. national avg$910-9% vs. national avg

Budget

Direct replacement, same location, basic fan, existing wiring.

Mid-Range

Upgrade fan with light, new switch, duct to exterior.

Premium

Combination unit (fan/light/heat/humidity sensor), new circuit.

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

MaterialCost/UnitBest For
Basic 50-110 CFM Fan$30-$80Direct replacements, secondary bathroomsSimple, effective, quiet models available under $60
Fan with Light$60-$180Bathrooms without separate overhead lighting, most standard upgradesCombines ventilation and lighting in one unit, easy replacement of existing combo
Humidity-Sensing Fan$80-$250Primary bathrooms, anyone who frequently forgets to run the fanRuns automatically when moisture rises - no switch required, prevents mold
Fan / Light / Heat Combo$120-$350Cold climates, primary bathrooms without separate heat sourceAll-in-one ceiling unit, radiant heat takes the chill off after a shower
Inline Fan for Multiple Baths$150-$400Multiple adjacent bathrooms, situations where noise is a concernOne powerful unit can serve multiple bathrooms, very quiet at the ceiling

Other Projects in Jacksonville

Jacksonville Estimate

Typical Range

$137$683

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per unit

$73–$1365

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →