Cost to Bathroom Tile Installation (Floor & Wall) in Philadelphia, PA

$1,830–$4,270 in Philadelphia

22% above the national average · 1.22x cost multiplier

Expect to pay $1,830–$4,270 for a bathroom tile installation (floor & wall) in Philadelphia, about 22% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Philadelphia prices.

Cost Breakdown in Philadelphia

Line Item	Low	Mid	High
Cost per sq ft	$12	$21	$43
Materials	$610	$1,464	$3,416
Labor	$854	$1,830	$3,660
Permits	$0	$0	$0
Total	$1,464+22% vs. national avg	$3,416+22% vs. national avg	$7,320+22% vs. national avg

Budget

Basic ceramic tile on floor only, standard thin-set, simple layout pattern

Mid-Range

Porcelain tile on floor and shower walls, cement board underlayment, accent strip or border

Premium

Natural stone or large-format porcelain on floors and walls, custom patterns, heated floor prep, premium grout

Material Options

Material prices below are national averages; availability in Philadelphia may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$10-$18/sq ft installed	Most affordable, huge variety of colors and sizes, easy to cut	Less durable than porcelain, higher water absorption rate, can chip	Budget bathroom floors and dry wall areasMost affordable, huge variety of colors and sizes, easy to cut
Porcelain Tile	$12-$28/sq ft installed	Very durable, low water absorption, works everywhere including showers, wide design range	Harder to cut, slightly more expensive than ceramic	Best all-around choice for bathroom floors and wet areasVery durable, low water absorption, works everywhere including showers, wide design range
Natural Stone (Marble/Travertine)	$20-$50/sq ft installed	Stunning luxury appearance, unique veining, high resale appeal	Requires regular sealing, can stain and etch, slippery when wet unless honed	Premium master bathrooms and accent wallsStunning luxury appearance, unique veining, high resale appeal
Glass Mosaic Tile	$18-$40/sq ft installed	Beautiful light reflection, waterproof, excellent for accent bands and niches	Expensive, labor-intensive to install, shows imperfections in substrate	Shower accent strips, niches, and backsplash areasBeautiful light reflection, waterproof, excellent for accent bands and niches
Large-Format Porcelain (24x24+)	$15-$35/sq ft installed	Fewer grout lines for a cleaner look, modern aesthetic, easier to clean	Requires very flat substrate, harder to install, heavier	Modern bathroom floors and feature wallsFewer grout lines for a cleaner look, modern aesthetic, easier to clean

Other Projects in Philadelphia

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Bathroom Tile Installation (Floor & Wall)

Philadelphia Estimate

Typical Range

$1,830–$4,270

vs. National Average

22% above national

Cost Multiplier

1.22x

Cost Per sq ft

$12–$43

Estimates apply Philadelphia's 1.22x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →