Cost to Bathroom Tile Installation (Floor & Wall) in New York City, NY

$2,130–$4,970 in New York City

42% above the national average · 1.42x cost multiplier

Homeowners in New York City typically spend $2,130–$4,970 on a bathroom tile installation (floor & wall), about 42% above the national average. Labor rates and contractor availability in the Northeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in New York City

Line Item	Low	Mid	High
Cost per sq ft	$14	$24	$50
Materials	$710	$1,704	$3,976
Labor	$994	$2,130	$4,260
Permits	$0	$0	$0
Total	$1,704+42% vs. national avg	$3,976+42% vs. national avg	$8,520+42% vs. national avg

Budget

Basic ceramic tile on floor only, standard thin-set, simple layout pattern

Mid-Range

Porcelain tile on floor and shower walls, cement board underlayment, accent strip or border

Premium

Natural stone or large-format porcelain on floors and walls, custom patterns, heated floor prep, premium grout

Material Options

Material prices below are national averages; availability in New York City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$10-$18/sq ft installed	Most affordable, huge variety of colors and sizes, easy to cut	Less durable than porcelain, higher water absorption rate, can chip	Budget bathroom floors and dry wall areasMost affordable, huge variety of colors and sizes, easy to cut
Porcelain Tile	$12-$28/sq ft installed	Very durable, low water absorption, works everywhere including showers, wide design range	Harder to cut, slightly more expensive than ceramic	Best all-around choice for bathroom floors and wet areasVery durable, low water absorption, works everywhere including showers, wide design range
Natural Stone (Marble/Travertine)	$20-$50/sq ft installed	Stunning luxury appearance, unique veining, high resale appeal	Requires regular sealing, can stain and etch, slippery when wet unless honed	Premium master bathrooms and accent wallsStunning luxury appearance, unique veining, high resale appeal
Glass Mosaic Tile	$18-$40/sq ft installed	Beautiful light reflection, waterproof, excellent for accent bands and niches	Expensive, labor-intensive to install, shows imperfections in substrate	Shower accent strips, niches, and backsplash areasBeautiful light reflection, waterproof, excellent for accent bands and niches
Large-Format Porcelain (24x24+)	$15-$35/sq ft installed	Fewer grout lines for a cleaner look, modern aesthetic, easier to clean	Requires very flat substrate, harder to install, heavier	Modern bathroom floors and feature wallsFewer grout lines for a cleaner look, modern aesthetic, easier to clean

Other Projects in New York City

Full Kitchen Remodel

Full Bathroom Remodel

Hardwood Floor Installation

Back to national average for Bathroom Tile Installation (Floor & Wall)

New York City Estimate

Typical Range

$2,130–$4,970

vs. National Average

42% above national

Cost Multiplier

1.42x

Cost Per sq ft

$14–$50

Estimates apply New York City's 1.42x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →