Cost to Bathroom Tile Installation (Floor & Wall) in Los Angeles, CA (2026)
If you’re budgeting a bathroom tile installation (floor & wall) in Los Angeles, most projects run $1,713-$3,997, 14% above the $2,800 national average. What moves that number most is usually one thing: Tile Material Choice. On its own it can swing the cost by $1 - $35/sq ft for materials, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose porcelain over natural stone. You get a similar high-end look at $12-$28/sq ft installed versus $20-$50 for stone, with less maintenance.
In the West Coast (where Los Angeles sits): Highest tile installation labor costs nationally.
$1,713-$3,997 in Los Angeles
14% above the national average · 1.14x cost multiplier
In Los Angeles, a bathroom tile installation (floor & wall) runs $1,713 to $3,997 on average - about 14% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $11 | $19 | $40 |
| Materials | $588 | $1,410 | $3,290 |
| Labor | $778 | $1,667 | $3,335 |
| Permits | $0 | $0 | $0 |
| Total | $1,366+14% vs. national avg | $3,195+14% vs. national avg | $6,860+14% vs. national avg |
Budget
Basic ceramic tile on floor only, standard thin-set, simple layout pattern
Mid-Range
Porcelain tile on floor and shower walls, cement board underlayment, accent strip or border
Premium
Natural stone or large-format porcelain on floors and walls, custom patterns, heated floor prep, premium grout
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $10-$18/sq ft installed | Budget bathroom floors and dry wall areasMost affordable, huge variety of colors and sizes, easy to cut |
| Porcelain Tile | $12-$28/sq ft installed | Best all-around choice for bathroom floors and wet areasVery durable, low water absorption, works everywhere including showers, wide design range |
| Natural Stone (Marble/Travertine) | $20-$50/sq ft installed | Premium master bathrooms and accent wallsStunning luxury appearance, unique veining, high resale appeal |
| Glass Mosaic Tile | $18-$40/sq ft installed | Shower accent strips, niches, and backsplash areasBeautiful light reflection, waterproof, excellent for accent bands and niches |
| Large-Format Porcelain (24x24+) | $15-$35/sq ft installed | Modern bathroom floors and feature wallsFewer grout lines for a cleaner look, modern aesthetic, easier to clean |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$1,713-$3,997
vs. National Average
14% above national
Cost Multiplier
1.14x
Cost Per sq ft
$11-$40
This 1.14x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →