Cost to Bathroom Flooring in Minneapolis, MN

$525–$4,725 in Minneapolis

5% above the national average · 1.05x cost multiplier

In Minneapolis, a bathroom flooring runs $525 to $4,725 on average — about 5% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Minneapolis

Line Item	Low	Mid	High
Cost per sq ft	$3	$8	$19
Materials	$315	$630	$1,890
Labor	$525	$945	$2,310
Permits	$0	$0	$0
Total	$840+5% vs. national avg	$1,575+5% vs. national avg	$4,200+5% vs. national avg

Budget

Vinyl sheet or LVP, 50 sq ft, basic install, self-adhesive or floating

Mid-Range

Porcelain tile, 60 sq ft, standard lay, matching grout

Premium

Natural stone or large-format tile, custom pattern, heated underlayment

Material Options

Material prices below are national averages; availability in Minneapolis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$2-$5/sq ft materials	Durable, water-resistant, huge style selection, affordable	Cold underfoot, grout lines need maintenance, can crack	Budget to mid-range bathrooms, high-traffic floorsDurable, water-resistant, huge style selection, affordable
Porcelain Tile	$3-$10/sq ft materials	Lower water absorption than ceramic, very durable, mimics stone or wood	Harder to cut, heavier, higher cost	Wet areas, primary baths, long-term installationsLower water absorption than ceramic, very durable, mimics stone or wood
Luxury Vinyl Plank (LVP)	$2-$6/sq ft materials	100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost	Not as premium-looking, can't be refinished	Budget remodels, rentals, families with kids, DIY installs100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost
Natural Stone (Marble/Travertine)	$8-$25/sq ft materials	Unique beauty, premium look, adds home value	Requires sealing, porous, higher maintenance, expensive	Primary baths where aesthetics are priorityUnique beauty, premium look, adds home value
Vinyl Sheet	$1-$3/sq ft materials	Seamless surface, fully waterproof, very low cost, easy to clean	Less durable long-term, limited design, can tear	Rental properties, budget bathrooms, quick turnaroundsSeamless surface, fully waterproof, very low cost, easy to clean

Other Projects in Minneapolis

Furnace Replacement

Attic Insulation

Basement Finishing

Back to national average for Bathroom Flooring

Minneapolis Estimate

Typical Range

$525–$4,725

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per sq ft

$3–$19

Estimates apply Minneapolis's 1.05x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →