Cost to Bathroom Flooring in Jacksonville, FL (2026)
If you’re budgeting a bathroom flooring in Jacksonville, most projects run $435-$3,917, 13% below the $1,800 national average. What moves that number most is usually one thing: Flooring Material. On its own it can swing the cost by $1-$20/sq ft difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: LVP is the value pick for bathroom floors - it's 100% waterproof, warmer than tile, and you can often DIY the install for $3-$7/sq ft total versus $8-$14/sq ft for professionally installed tile.
In the Southeast (where Jacksonville sits): Lower labor costs; good value region for tile and flooring work.
$435-$3,917 in Jacksonville
13% below the national average · 0.87x cost multiplier
In Jacksonville, a bathroom flooring runs $435 to $3,917 on average - about 13% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Jacksonville
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $7 | $16 |
| Materials | $287 | $573 | $1,719 |
| Labor | $403 | $726 | $1,775 |
| Permits | $0 | $0 | $0 |
| Total | $690-14% vs. national avg | $1,299-13% vs. national avg | $3,494-13% vs. national avg |
Budget
Vinyl sheet or LVP, 50 sq ft, basic install, self-adhesive or floating
Mid-Range
Porcelain tile, 60 sq ft, standard lay, matching grout
Premium
Natural stone or large-format tile, custom pattern, heated underlayment
Material Options
Material prices below are national averages; availability in Jacksonville may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $2-$5/sq ft materials | Budget to mid-range bathrooms, high-traffic floorsDurable, water-resistant, huge style selection, affordable |
| Porcelain Tile | $3-$10/sq ft materials | Wet areas, primary baths, long-term installationsLower water absorption than ceramic, very durable, mimics stone or wood |
| Luxury Vinyl Plank (LVP) | $2-$6/sq ft materials | Budget remodels, rentals, families with kids, DIY installs100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost |
| Natural Stone (Marble/Travertine) | $8-$25/sq ft materials | Primary baths where aesthetics are priorityUnique beauty, premium look, adds home value |
| Vinyl Sheet | $1-$3/sq ft materials | Rental properties, budget bathrooms, quick turnaroundsSeamless surface, fully waterproof, very low cost, easy to clean |
Other Projects in Jacksonville
Jacksonville Estimate
Typical Range
$435-$3,917
vs. National Average
13% below national
Cost Multiplier
0.87x
Cost Per sq ft
$3-$16
This 0.87x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →