Cost to Bathroom Flooring in Dallas, TX (2026)
If you’re budgeting a bathroom flooring in Dallas, most projects run $453-$4,080, 9% below the $1,800 national average. What moves that number most is usually one thing: Flooring Material. On its own it can swing the cost by $1-$20/sq ft difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: LVP is the value pick for bathroom floors - it's 100% waterproof, warmer than tile, and you can often DIY the install for $3-$7/sq ft total versus $8-$14/sq ft for professionally installed tile.
In the Southeast (where Dallas sits): Lower labor costs; good value region for tile and flooring work.
$453-$4,080 in Dallas
9% below the national average · 0.91x cost multiplier
In Dallas, a bathroom flooring runs $453 to $4,080 on average - about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $7 | $16 |
| Materials | $290 | $579 | $1,737 |
| Labor | $431 | $777 | $1,898 |
| Permits | $0 | $0 | $0 |
| Total | $721-10% vs. national avg | $1,356-10% vs. national avg | $3,635-9% vs. national avg |
Budget
Vinyl sheet or LVP, 50 sq ft, basic install, self-adhesive or floating
Mid-Range
Porcelain tile, 60 sq ft, standard lay, matching grout
Premium
Natural stone or large-format tile, custom pattern, heated underlayment
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $2-$5/sq ft materials | Budget to mid-range bathrooms, high-traffic floorsDurable, water-resistant, huge style selection, affordable |
| Porcelain Tile | $3-$10/sq ft materials | Wet areas, primary baths, long-term installationsLower water absorption than ceramic, very durable, mimics stone or wood |
| Luxury Vinyl Plank (LVP) | $2-$6/sq ft materials | Budget remodels, rentals, families with kids, DIY installs100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost |
| Natural Stone (Marble/Travertine) | $8-$25/sq ft materials | Primary baths where aesthetics are priorityUnique beauty, premium look, adds home value |
| Vinyl Sheet | $1-$3/sq ft materials | Rental properties, budget bathrooms, quick turnaroundsSeamless surface, fully waterproof, very low cost, easy to clean |
Other Projects in Dallas
Dallas Estimate
Typical Range
$453-$4,080
vs. National Average
9% below national
Cost Multiplier
0.91x
Cost Per sq ft
$3-$16
This 0.91x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →