Cost to Crawl Space Encapsulation in Albuquerque, NM

$3,220–$13,800 in Albuquerque

8% below the national average · 0.92x cost multiplier

Expect to pay $3,220–$13,800 for a crawl space encapsulation in Albuquerque, about 8% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.

Cost Breakdown in Albuquerque

Line Item	Low	Mid	High
Cost per sq ft	$3	$6	$11
Materials	$1,104	$2,944	$6,900
Labor	$1,656	$3,220	$5,520
Permits	$0	$184	$276
Total	$2,760-8% vs. national avg	$6,348-8% vs. national avg	$12,696-8% vs. national avg

Budget

Basic encapsulation for a 600 sq ft crawl space - 6-mil poly vapor barrier, basic vents sealed, no dehumidifier

Mid-Range

Full encapsulation of 1,000 sq ft crawl space - 20-mil liner, sealed vents, wall insulation, drainage mat, and dehumidifier

Premium

Complete system for 1,400 sq ft crawl space - 20-mil+ liner, spray foam insulation on walls, interior drainage system, commercial-grade dehumidifier, encapsulated access door

Material Options

Material prices below are national averages; availability in Albuquerque may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
6-Mil Poly Vapor Barrier (Basic)	$0.10 - $0.20 per sq ft (materials only)	Lowest cost, available at any home center, meets minimum code in some areas	Tears easily, degrades faster, not suitable for accessible crawl spaces, minimum protection only	Very tight budgets or as a temporary solution - not recommended for permanent encapsulationLowest cost, available at any home center, meets minimum code in some areas
12-Mil Reinforced Liner	$0.25 - $0.45 per sq ft (materials only)	Good balance of cost and durability, handles occasional foot traffic, resists puncture	Not the premium option, still less durable than 20-mil options	Most residential crawl spaces with low foot traffic - the sweet spot of cost and performanceGood balance of cost and durability, handles occasional foot traffic, resists puncture
20-Mil+ Commercial-Grade Liner	$0.45 - $0.80 per sq ft (materials only)	Extremely durable, withstands regular access, longest lifespan (25+ years), some manufacturers offer lifetime warranties	Highest material cost, heavier and harder to install correctly	Crawl spaces that need regular access for mechanical equipment, or homeowners who want a one-time permanent solutionExtremely durable, withstands regular access, longest lifespan (25+ years), some manufacturers offer lifetime warranties
Rigid Foam Wall Insulation (EPS/XPS)	$1.00 - $2.00 per sq ft installed	Moisture-resistant, adds significant R-value to foundation walls, creates conditioned crawl space	Requires fire protection if left exposed, more labor to install than liner alone	Crawl spaces in cold climates where conditioning the space is the goalMoisture-resistant, adds significant R-value to foundation walls, creates conditioned crawl space
Spray Foam Wall Insulation	$2.00 - $4.00 per sq ft installed	Air-seals and insulates simultaneously, fills all gaps and irregular surfaces, highest R-value per inch	Must be professionally applied, most expensive option, permanent once applied	Maximum performance encapsulation in cold or mixed climates where air sealing is criticalAir-seals and insulates simultaneously, fills all gaps and irregular surfaces, highest R-value per inch

Other Projects in Albuquerque

Central AC Installation

Roof Replacement (Asphalt Shingles)

Full Kitchen Remodel

Back to national average for Crawl Space Encapsulation

Albuquerque Estimate

Typical Range

$3,220–$13,800

vs. National Average

8% below national

Cost Multiplier

0.92x

Cost Per sq ft

$3–$11

Estimates apply Albuquerque's 0.92x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →