Drywall Repair Cost Calculator

Estimate drywall repair cost by number of repairs and damage size.

A drywall repair costs $150 to $1,000, with a national average of $450. Use the calculator below to estimate your cost by size, quality tier, and location.

Last updated: March 25, 2026

Drywall Repair Cost Calculator

Estimate drywall repair cost by number of repairs and damage size.

120 repairs

Estimated Total

$750

Cost per repairs$150
vs National Average+67%

Itemized Breakdown

Materials
$150
Labor
$600
Total$750

This calculator provides estimates based on national averages adjusted for your region. Actual costs may vary significantly based on specific project conditions, contractor availability, material prices, and local market factors. Always get at least 3 quotes from licensed, insured contractors before starting your project.

Want the full picture?

Read our complete Drywall Repair cost guide with material comparisons, contractor tips, savings strategies, and regional pricing data.

View Full Cost Guide

Quick Cost Reference

National Average$450
Typical Range$150 - $1,000
Low End$75
High End$3,000

Cost by Tier

Budget

Small nail holes and hairline cracks, single room

$150
Mid-Range

Fist-sized hole (3-6 inch), proper patch with backer, tape, mud, texture match

$480
Premium

Large section replacement (2+ sq ft), texture matching across multiple repairs

$1,800

How This Calculator Works

This drywall repair cost calculator estimates your total project cost from four inputs: project size, quality tier, the options you select, and your location. It combines material and labor rates for your chosen tier, adds typical permit costs, then applies a regional cost multiplier so the estimate reflects pricing in your state.

Estimates use 2026 cost data cross-referenced from multiple industry sources. Treat the result as a planning range, not a quote. Your final price depends on your specific scope, material choices, and local contractor availability, so collect at least three itemized bids before you set a budget.

What Affects Your Drywall Repair Cost

Hole Size

$75-$1,500

Small nail holes (under 1/2 inch) are $10-$25 per repair with spackle. Medium holes (1-4 inch) need a patch kit and cost $75-$200 per repair. Large holes (4+ inches) require backing strips or California patches and run $150-$400 each. Drywall section replacement (square or rectangular cut-out) costs $200-$600 per panel section.

Number of Repairs

$50-$500

Most contractors have a minimum charge of $150-$300 for a service call. Getting 5-10 small repairs done in one visit costs little more than 1-2 repairs and makes economic sense. Batching repairs to a single call is always the cost-efficient move.

Texture Matching

$50-$300 per repair

Matching existing texture is the hardest part of drywall repair. Orange peel, knockdown, and skip trowel all require different techniques and tools. A contractor who specializes in drywall repair will get the texture right; a general handyman may not.

Paint Matching

$50-$200

Some repair quotes include spot painting. Most don't. Primer plus a matched paint coat on a repair adds $50-$150 per repair in materials and labor. Without paint, the repair will show.

Water Damage

$200-$2,000

Water-damaged drywall needs to fully dry before repair (or the new patch will develop mold). If the moisture source isn't fixed, any repair is temporary. Extensive water damage may require full section replacement plus mold remediation - this changes the project scope significantly.

Frequently Asked Questions

How much does a drywall repair cost?

A drywall repair costs $150 to $1,000 for a typical project, with a national average of $450. Budget projects start around $75, and premium work can reach $3,000. Use the calculator above for an estimate matched to your size, quality tier, and state.

How does this drywall repair cost calculator work?

It combines 2026 material and labor rates for your selected quality tier, adds typical permit costs and any options you choose, then applies a cost multiplier for your state. Adjust the inputs to see your estimate update instantly.

Is this calculator free to use?

Yes. This drywall repair cost calculator is free, requires no signup, and returns instant estimates.

Does the estimate include labor and permits?

Yes. Each estimate combines material and labor costs for your chosen quality tier plus typical permit fees. Your final price still depends on your specific scope and local contractor rates, so collect itemized quotes before budgeting.

How can I lower my drywall repair cost?

Batch all repairs into a single contractor visit - minimum charges mean the 5th hole costs almost nothing compared to calling separately for each. For a room you're painting anyway, good patching plus a full repaint hides imperfections better than perfect spot repairs with mismatched paint.

Free newsletter

Stay current on what renovations actually cost

Updates from CostToRenovate, when there is something worth sending. Free, no spam.

More Calculators