Outdoor Faucet / Spigot Installation Cost in 2026: What to Expect
Get a personalized estimate
Use our interactive calculator to estimate costs for your specific project size, quality, and location.
Cost Breakdown by Tier
| Component | Budget | Mid-Range | Premium |
|---|---|---|---|
| Materials | $40 | $80 | $150 |
| Labor | $100 | $200 | $400 |
| Permits | $0 | $50 | $75 |
| Total | $140 | $330 | $625 |
Budget
Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.
Mid-Range
New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.
Premium
Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.
Financing your outdoor faucet / spigot installation?
Compare home improvement loan rates from multiple lenders in minutes. Rates from 6.99% APR.
Sponsored
What Drives the Cost
New Installation vs. Replacement
$50 - $250Replacing an existing outdoor faucet at the same location is the simplest scenario - a licensed plumber can complete it in 30-60 minutes at $75-$200 total. Installing a new faucet at a new location requires running new supply pipe from an interior cold water line to the exterior, adding $100-$250 in labor and materials. The further the new faucet sits from existing supply lines, the more the cost increases.
Frost-Free vs. Standard Hose Bib
$20 - $80 in materialsStandard outdoor faucets cost $15-$30 and work in climates without freezing winters, but require manual shutoff and draining each fall. Frost-free hose bibs (also called anti-siphon or freezeless faucets) cost $30-$80 and are designed to self-drain when the handle is closed, preventing freeze damage. They require a minimum 6-8 inch wall thickness for the stem to work correctly. In climates that freeze, frost-free is always the right choice.
Wall Material and Penetration
$50 - $250Drilling through wood-frame walls with vinyl or wood siding is the easiest scenario at minimal added cost. Penetrating brick or stone veneer requires a masonry bit and more care for weatherproofing at $50-$100 extra. Stucco walls require careful patching after the pipe is through to prevent moisture infiltration at $100-$250 extra. Concrete block or poured concrete foundation walls are the most labor-intensive at $100-$200 extra.
Backflow Preventer
$30 - $80Most jurisdictions now require a backflow preventer (vacuum breaker) on outdoor faucets to prevent contaminated hose water from being siphoned back into the supply system. Frost-free faucets typically include an integral anti-siphon device. If you are adding a separate backflow preventer, plan on $30-$80 in parts and minimal additional labor.
Dedicated Interior Shutoff
$50 - $150A dedicated interior shutoff valve for each outdoor faucet lets you shut off only the outdoor supply in winter without affecting interior plumbing. It also allows servicing the outdoor faucet without shutting off the whole house. This valve costs $30-$60 in parts and $50-$100 to install, and is worth adding whenever a new faucet is installed.
Cost by Material or Type
| Option | Cost |
|---|---|
| Frost-Free Hose Bib (Anti-Siphon)Any climate with winter temperatures at or below 32°F - the clear default choice | $30-$80 each |
| Standard Brass Hose BibWarm climates (Florida, Hawaii, Southern California) where freezing is not a concern | $15-$35 each |
| Ball Valve Sillcock (Lockable)Vacation properties, rental units, or anywhere unauthorized water use is a concern | $40-$90 each |
| Yard Hydrant (Deep Burial)Large yards, garden areas, or barns where a faucet near the house is not convenient | $150-$350 each installed |
Regional Cost Variations
Labor rates and material costs vary significantly by region. Apply these multipliers to the national average to estimate costs in your area.
| Region | Adjustment | Est. Average |
|---|---|---|
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN | |
| NaN% to NaN% | $NaN - $NaN |
Timeline & What to Expect
DIY vs. Professional
Good for DIY
- Replacing an existing outdoor faucet with the same type at the same location
- Running new PEX supply line with SharkBite fittings (no soldering required)
- Drilling through wood-frame walls
- Installing a dedicated shutoff valve with push-to-connect fittings
- Caulking and weathersealing the exterior wall penetration
Potential savings: 40-60% - labor is the primary cost for a simple installation and a confident DIYer can handle most of it
Hire a Pro
- Penetrating masonry, stucco, or concrete walls
- Soldering copper connections
- Any work requiring a permit in your jurisdiction
- Diagnosing and repairing frozen or burst outdoor pipes
DIY feasibility: High - Installing an outdoor faucet is one of the more accessible plumbing DIY projects for a homeowner with basic tools and comfort working with pipes.
Risk warning: The main DIY risk is a failed connection inside the wall that leaks slowly and causes mold. Test under pressure before closing up any wall access. In cold climates, the frost-free faucet stem must be long enough to reach past the insulation plane - measure the wall thickness before buying the faucet.
How to Save Money
In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.
Add a dedicated interior shutoff valve at the same time - the marginal cost is $50-$100 and it makes winterization and future repairs far simpler.
Use SharkBite or similar push-to-connect fittings if DIYing - they eliminate the need to solder copper and are approved by most building codes for behind-wall use.
Group outdoor faucet additions with other plumbing work to save on the plumber's trip charge.
Buy the faucet at a plumbing supply or big-box store yourself - the markup when the plumber supplies it can be 50-100% over retail.
For multiple outdoor faucets, have a plumber do them all in one visit. The marginal cost for each additional faucet drops significantly.
If you need a faucet far from the house in a garden area, a yard hydrant installed with a simple trench is often more durable and convenient than an extension hose.
Seal the exterior wall penetration with foam backer rod and paintable exterior caulk - this is often skipped but prevents air infiltration and insect entry.
Questions to Ask Your Contractor
“Will you install a frost-free faucet, and is the stem length appropriate for my wall thickness?”
Why this matters: Frost-free faucets require specific stem lengths based on wall thickness (including insulation). The shut-off point must be inside the heated envelope of the house to prevent freezing.
“Does your bid include a dedicated interior shutoff valve?”
Why this matters: Many plumbers include only the outdoor faucet. A dedicated shutoff is worth $50-$100 extra and avoids having to turn off the whole house water to service the outdoor faucet.
“How will you weatherseal the exterior wall penetration?”
Why this matters: A poorly sealed wall penetration admits air, moisture, and insects. Ask specifically what materials they use to seal around the pipe at the exterior.
“Does my jurisdiction require a permit for this installation?”
Why this matters: Many localities require permits even for outdoor faucet installations. An experienced local plumber will know the answer and should handle the permit if required.
Ready to get quotes?
Compare quotes from local outdoor faucet / spigot installation contractors.
Sponsored — we may earn a commission at no cost to you.
Sources & Methodology
Cost data cross-referenced from multiple sources. See our full methodology for details on how we research and calculate costs.
- HomeAdvisor - Outdoor Faucet Installation Cost (2025)
- Fixr - Outdoor Faucet Installation Cost (2025)
- HomeGuide - Outdoor Faucet Cost (2025)
- Angi - How Much Does It Cost to Install an Outdoor Faucet? (2025)
Quick Answer
National Average
$300
Typical Range
$150 - $500
Low End
$75
High End
$900
Cost Per per faucet installed
$150 - $500