Range Hood Installation Cost in 2026: What to Expect
Get a personalized estimate
Use our interactive calculator to estimate costs for your specific project size, quality, and location.
Cost Breakdown by Tier
| Component | Budget | Mid-Range | Premium |
|---|---|---|---|
| Materials | $200 | $600 | $2,000 |
| Labor | $150 | $350 | $1,000 |
| Permits | $0 | $0 | $0 |
| Total | $350 | $950 | $3,200 |
Budget
Under-cabinet range hood with existing ductwork, direct replacement - standard installation over a 30-inch range
Mid-Range
Wall-mounted chimney-style range hood (600-900 CFM), new duct run to exterior, professional installation - 30-36 inch width
Premium
Custom or high-end range hood (1,200+ CFM) over a professional-style range, new 6-inch duct run with exterior cap, makeup air consideration, 36-48 inch width
Financing your range hood installation?
Compare home improvement loan rates from multiple lenders in minutes. Rates from 6.99% APR.
Sponsored
What Drives the Cost
Hood Type and Style
$150 - $2,500 for the hood unitUnder-cabinet hoods (mounted to the bottom of upper cabinets) are the least expensive at $80-$400. Wall-mounted chimney hoods are the most popular style at $300-$1,500. Island hoods that hang from the ceiling over an island range run $400-$2,500. Insert/liner hoods that go inside a custom hood enclosure are $200-$1,500 for just the mechanical unit.
Ducted vs. Ductless (Recirculating)
$200 - $1,000Ducted hoods vent air to the outside and are far more effective at removing smoke, steam, and cooking odors. Ductless hoods filter and recirculate air - easier to install but only 40-60% as effective. If you don't have existing ductwork, running a new duct through cabinets and an exterior wall adds $200-$600 for the duct work and exterior cap installation.
CFM Rating and Fan Size
$100 - $500 for higher-rated unitsAirflow is measured in cubic feet per minute (CFM). For standard 30-inch residential ranges, 400-600 CFM is adequate. For 36-inch ranges or high-BTU gas ranges, 600-1,200 CFM is recommended. For professional-grade ranges over 60,000 BTU, 1,200-2,000 CFM may be required. Higher CFM units cost more and may trigger makeup air requirements in tighter homes.
Duct Run Length and Complexity
$150 - $800A simple 6-foot horizontal duct run to an exterior wall costs $150-$300 in materials and labor. A long run requiring elbows, up through a cabinet, through an exterior wall, and out with a cap can run $400-$800. Every 90-degree elbow reduces effective CFM, so duct path design matters for performance.
Makeup Air Requirements
$500 - $3,000High-CFM range hoods (over 400 CFM in some states, over 600 CFM in others) can depressurize a tight home, causing backdrafting of fireplaces and combustion appliances. Some building codes require a makeup air system when installing high-CFM hoods. A makeup air damper and duct add $500-$3,000 depending on complexity.
Cost by Material or Type
| Option | Cost |
|---|---|
| Under-Cabinet Range HoodBudget kitchens, kitchens with upper cabinets extending over range, rental properties | $80-$400 (unit only) |
| Wall-Mounted Chimney HoodMost popular style in kitchen renovations - the designer look at a reasonable price | $300-$1,500 (unit only) |
| Island Range HoodKitchens with island cooktops or ranges | $400-$2,500 (unit only) |
| Insert/Liner HoodCustom kitchens with a designer wood or plaster hood enclosure | $200-$1,500 (unit only) |
| Professional/Commercial-Grade HoodProfessional-style ranges (Wolf, Viking, Thermador), heavy daily cooking households | $1,000-$4,000+ (unit only) |
Regional Cost Variations
Labor rates and material costs vary significantly by region. Apply these multipliers to the national average to estimate costs in your area.
| Region | Adjustment | Est. Average |
|---|---|---|
| Northeast | +12% to +22% | $1,008 - $1,098 |
| West Coast | +15% to +28% | $1,035 - $1,152 |
| Southeast | -12% to -5% | $792 - $855 |
| Midwest | -15% to -8% | $765 - $828 |
| Mountain West | +0% to +10% | $900 - $990 |
Timeline & What to Expect
DIY vs. Professional
Good for DIY
- Removing an existing under-cabinet hood
- Installing a new under-cabinet hood in the same location with existing ductwork
- Connecting wiring if within your skill level (or using an existing circuit)
- Installing ductwork in accessible locations (attic, above cabinets)
Potential savings: 30-45%
Hire a Pro
- Running new electrical circuits for the hood
- Routing ductwork through exterior walls (requires wall penetration)
- Installing a makeup air system
- Wall-mounting a heavy chimney-style hood (safety risk if not done correctly)
DIY feasibility: Moderate
Risk warning: The main risks are electrical work (always use a licensed electrician if adding a new circuit) and improper ductwork sealing. Leaking duct joints send grease-laden air into your walls and attic, creating a fire hazard over time. Use foil tape - never cloth duct tape - on all duct joints. An improperly mounted heavy chimney hood can fall, causing injury or damage. Follow the manufacturer's stud-mounting requirements exactly.
How to Save Money
Reuse the existing ductwork if possible. If your old hood or microwave vented outside and the duct is in good shape, new hood installation drops to $150-$300 in labor.
Choose stainless steel for longevity. Stainless range hoods clean more easily and last significantly longer than painted finishes, which scratch and show grease staining over time.
Skip the highest CFM unless you cook heavy. 400-600 CFM handles almost any residential cooking scenario. Oversizing your hood creates noise, cost, and potential makeup air issues.
Consider a microwave-range hood combo if cabinet space is tight. A microwave with an integrated range hood runs $300-$700 and handles ventilation plus over-range microwave in the same footprint.
Run the duct as straight as possible. Every 90-degree elbow reduces effective CFM by about 10%. A straight or gently curved path means you can buy a smaller (cheaper) motor and still get adequate ventilation.
Install a backdraft damper in the duct. A $15-$30 part prevents cold air and pests from entering through the duct when the hood is off. Often missing in budget installations.
Buy during kitchen appliance sales. Range hoods are often discounted 20-30% during Memorial Day, Labor Day, and Black Friday sales when appliance retailers run promotions.
Questions to Ask Your Contractor
“Will you use foil tape or mastic on all duct joints?”
Why this matters: Duct leaks send grease into your walls. Foil tape or mastic sealant is code-compliant; cloth duct tape is not and fails over time.
“Does my CFM selection trigger makeup air requirements in my jurisdiction?”
Why this matters: Many areas have rules requiring makeup air systems for high-CFM hoods. An experienced installer will check local code before specifying equipment.
“What exterior cap do you use and how will you seal the wall penetration?”
Why this matters: Pest-proof, spring-loaded exterior caps prevent birds and rodents from nesting in the duct. Wall penetrations must be sealed with weatherproof caulk to prevent moisture and air infiltration.
“Is my electrical circuit rated for this hood's amperage?”
Why this matters: Most residential hoods run on a standard 120V/15A circuit. High-end commercial-grade hoods may require a dedicated circuit. Know this before buying.
“How will you handle the cabinet above the range if it needs to be removed or modified?”
Why this matters: Wall-mounted chimney hoods require removing the upper cabinet above the range. Some configurations need a wood filler or new cabinet section to fill the space - clarify this scope.
Ready to get quotes?
Compare quotes from local range hood installation contractors.
Sponsored — we may earn a commission at no cost to you.
Sources & Methodology
Cost data cross-referenced from multiple sources. See our full methodology for details on how we research and calculate costs.
- Angi (2025)
- HomeAdvisor (2025)
- Fixr (2025)
- HomeGuide (2026)
Quick Answer
National Average
$900
Typical Range
$400 - $1,800
Low End
$150
High End
$5,000
Cost Per per hood
$150 - $5000