Cost to Retaining Wall Construction in Raleigh, NC

$1,800–$10,800 in Raleigh

10% below the national average · 0.90x cost multiplier

Homeowners in Raleigh typically spend $1,800–$10,800 on a retaining wall construction, about 10% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Raleigh

Line Item	Low	Mid	High
Cost per sq ft of wall face	$18	$54	$180
Materials	$720	$2,250	$7,200
Labor	$1,080	$3,150	$10,800
Permits	$180	$450	$1,350
Total	$1,980-10% vs. national avg	$5,850-10% vs. national avg	$21,150-10% vs. national avg

Budget

20 linear ft of timber or small concrete block retaining wall, under 3 ft tall, simple grading, no drainage system.

Mid-Range

40 linear ft of interlocking concrete block wall, 3-4 ft tall, gravel backfill and drainage pipe, basic landscaping restoration.

Premium

Engineered concrete or natural stone wall, 6+ ft tall, 60+ linear ft, full drainage system, geotextile fabric, structural engineering, tiered walls with steps.

Material Options

Material prices below are national averages; availability in Raleigh may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Timber / Railroad Tie	$20-$35 per sq ft installed	Lowest installed cost, blends naturally into garden settings, easy for experienced DIYers to work with on small walls	Shortest lifespan at 10-20 years, treated wood chemicals are a concern near gardens, not suitable for walls over 4 ft	Low garden walls under 3 ft, budget-conscious projects, informal landscapingLowest installed cost, blends naturally into garden settings, easy for experienced DIYers to work with on small walls
Interlocking Concrete Block (Allan Block, Versa-Lok)	$25-$60 per sq ft installed	Engineered for retaining wall loads, modular and consistent, no mortar required, 50+ year lifespan, widely available	Can look utilitarian without capping or facing stone, requires proper base preparation and drainage to perform as designed	Most residential retaining walls 1-6 ft tall, cost-effective and durable middle groundEngineered for retaining wall loads, modular and consistent, no mortar required, 50+ year lifespan, widely available
Natural Stone (Fieldstone, Flagstone, Boulders)	$50-$100+ per sq ft installed	Highest aesthetic value, extremely durable, can last 100+ years when properly built, increases property value	Requires skilled masons, expensive material and labor, irregular shapes make precise construction harder	High-end landscaping, historic properties, walls that are a focal point of the yard designHighest aesthetic value, extremely durable, can last 100+ years when properly built, increases property value
Poured Concrete	$60-$120 per sq ft installed	Maximum structural strength, can be formed to any shape, smooth or textured finishes available, engineered for heavy loads	Requires forming, rebar, and skilled labor; more expensive than block; can crack without proper reinforcement and drainage	Tall walls over 6 ft, commercial or high-load applications, sites with extreme lateral soil pressureMaximum structural strength, can be formed to any shape, smooth or textured finishes available, engineered for heavy loads

Other Projects in Raleigh

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Retaining Wall Construction

Raleigh Estimate

Typical Range

$1,800–$10,800

vs. National Average

10% below national

Cost Multiplier

0.90x

Cost Per sq ft of wall face

$18–$180

Estimates apply Raleigh's 0.90x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →